Pulsar mini SSTC

Pulsar SSTC

click pictures for larger view Tesla Coil Features "Spun 1.2" X 6" Toriod. Uses professionally made boards. They are 2 layer and of the highest quality. Runs at about 300KHz. No variac is needed simply plug it in and flip the switch. Power switch is on 12 foot cord. This coil comes default with a breakout pint but the toroid can be raised to eliminate it. Adjustable burst rate and width via INCLUDED Interupter and 3 foot cable. Coil is very efficient and like my other coils has no IGBT heating even at high BPS and pusle width ~12 inches tall, 8 inches wide, sparks are very bright and thick and can reach approximately 8 inches. My coils have been tediously tested and refined for ruggedness and reliability, as well as fun factor. After all entertainment is the primary goal here. I take a lot of pride in my work and strive for perfection. I started selling coils three years ago and so far I have had only great feedback on these coils and more than a few returning customers. I continually improve my design and welcome any new ideas or suggestions. You absolutley will not find a coil of this quality anywhere for such a low price! Ive have cut down my frequency of sales in order to offer a better product by putting more time into each coil. click this sentance for the manual, please read it before operation Here's short demo video with some info
A Little About My Coiling History I started building coils about eight years ago and my first coil was a of the spark gap variety. Although fun and exciting I was disappointed in its short run times, loud spark gap and constant failure of the high voltage transformer. Not to mention the wake up call I got from a bad shock off the tank caps. It was then approximately six years later I discovered the solid state coil! From there I built several of my own coils and fine tuned a design that eventually turned into the ones I currently sell. I stand by this design and so far I have invested 4+ years and thousands of dollars into it. !ATTENTION! I honestly doubt this coil could kill but as with any high power or high voltage device. I am not responsible for any death/deaths or injury/injuries that may result from the use or misuse of this Tesla Coil. I am not responsible for any damage that this coil my inflict on any human, animal or object. !PLEASE BE CAREFUL! If you have any other questions, concerns, needs, have an idea or just hate using the ebay messaging feel free to email me directly Tom_headoflead@yahoo.com

Pulsar SSTC

click pictures for larger view

Tesla Coil Features

"Spun 1.2" X 6" Toriod.
Uses professionally made boards. They are 2 layer and of the highest quality.
Runs at about 300KHz.
No variac is needed simply plug it in and flip the switch. Power switch is on 12 foot cord.
This coil comes default with a breakout pint but the toroid can be raised to eliminate it.
Adjustable burst rate and width via INCLUDED Interupter and 3 foot cable.
Coil is very efficient and like my other coils has no IGBT heating even at high BPS and pusle width
~12 inches tall, 8 inches wide, sparks are very bright and thick and can reach approximately 8 inches.

My coils have been tediously tested and refined for ruggedness and reliability, as well as fun factor. After all entertainment is the primary goal here. I take a lot of pride in my work and strive for perfection. I started selling coils three years ago and so far I have had only great feedback on these coils and more than a few returning customers. I continually improve my design and welcome any new ideas or suggestions. You absolutley will not find a coil of this quality anywhere for such a low price! Ive have cut down my frequency of sales in order to offer a better product by putting more time into each coil.

click this sentance for the manual, please read it before operation

Here's short demo video with some info

A Little About My Coiling History

I started building coils about eight years ago and my first coil was a of the spark gap variety. Although fun and exciting I was disappointed in its short run times, loud spark gap and constant failure of the high voltage transformer. Not to mention the wake up call I got from a bad shock off the tank caps. It was then approximately six years later I discovered the solid state coil! From there I built several of my own coils and fine tuned a design that eventually turned into the ones I currently sell. I stand by this design and so far I have invested 4+ years and thousands of dollars into it.

!ATTENTION!

I honestly doubt this coil could kill but as with any high power or high voltage device. I am not responsible for any death/deaths or injury/injuries that may result from the use or misuse of this Tesla Coil. I am not responsible for any damage that this coil my inflict on any human, animal or object.

!PLEASE BE CAREFUL!

If you have any other questions, concerns, needs, have an idea or just hate using the ebay messaging feel free to email me directly Tom_headoflead@yahoo.com